The modern office furniture commonly used material
hits：766The modern office furniture commonly used material, 1. The man-made board class
the plank product refers to the classOn the basis of the timber wood composite materials.As the main material of board type furniture, wood has the following advantages:
1) wood light and strong, more flexible metal, ability and large deformation is not easy to break, so the wooden furniture is light and durable; 2) on the thermal and electrical conductivity is low, the wood furniture can give a person with warm in winter and cool in summer comfort and security; 3) wood natural color and beautiful decorative pattern, and easy coloring and finishing;
4) wood plastic, wood slice, can under thermal deformation, using this feature, can be made into variousKind of bent wood furniture;
5) easy to joint lumber, such as glue, nail or wood tenon, can be relatively easy to make them solid combination. 6) processing is simple, compared with the metal, the processing equipment and processing procedures are relatively simple, can be mass production. but for furniture manufacturing, wood is also the inevitable lack of restriction.
Plywood (1) : also called splint, by the adjacent by three layer or an odd number of wood veneer veneer glued wood texture vertical direction.
Often used in our chairs and sofa.Splint has 5 plywood, 7 layersPlywood, 9 layers of plywood.Specifications are as follows: 9 mm, 15 mm, 18 mm.
Fiber board (2) : fiberboard material is to use the path or hybrid materials by planing, broken, pulping (adding auxiliary agent), molding shop, hot pressing and into.Usually use the adhesive properties of wood fiber itself.
According to the volume weight is different, can be divided into horniness beaverboard, half horniness beaverboard and soft qualitative beaverboard;As a commonly used furniture manufacturing plate of medium density fiberboard (MDF).
< img Alt = "" height =" 538 "SRC ="http://www.kaiweijiaju.com/uploads/allimg/151010/1-151010134Q6205.jpg "width =" 794 "/ >
(3) particle board(PB) < / stRong >
Particle board is using path, brushwood and processing waste material, such as broken material by peeling, broken and add a certain amount of adhesive patches, shop is hot.Particieboard wide, flat surface, and mechanical strength, uniform is a good material for furniture production.
2. The wood veneer
after heat treatment of wood processing, cut out of the wood veneer called wood veneer, due to cutting in different ways (transverse, longitudinal cutting, obliqueCut), cutting out the pattern are also different.
the quality of the wood from the length, thickness, decorative pattern, color, humidity, and black lines, scar from several aspects such as detecting.Wood can be divided into three levels:
class A wood veneer: without her, scar, decorative pattern is clear, uniform color, mainly used in the front of the furniture.
B grade wood: a little flaw, used for furniture.
C level wood veneer: poor quality, generally used for internal.
commonly used wood veneer thickness usually is 0.6 mm.
3 , ,Real wood (including sealing side)
$ for a lot of wood furniture manufacturing, here are the commonly used several kinds of simple introduction.
Birch: (1) has two kinds of northeast birch and southwest birch, moderate texture, cheap, for oneA solid wood furniture production adopted;
(2) the olive wood: moderate texture, texture is birch times, can be directly used for solid wood furniture, also can stick a high-grade wood veneer and outside use.
(3) pine: a kind of wood in the north, the texture, moderate hardness, not easy to deformation, which has two kinds of Korean pine, white pine, the southern pine and the far;
(4) Chinese catalpa wood, wood grain is good, quality of a material medium, commonly used to do antique and modern solid wood furniture materials;
(5) rubber wood: good texture, moderate hardness, has the certain texture, used for furniture or wooden crafts materials;< bR / >(6) ju wood: good texture, used in the manufacture of solid wood furniture, can also be used
13510505995