Technical standard of hotel furniture

Technical standard hotel furniture < span sTyle = "font - size: 16 px;"> , ,QB/T2603-2003 "wooden hotel furniture";GB/T3324-1995 "wood furniture general technical conditions";GB/T3325-1995 "metal furniture general technical conditions";QB/T1951.1-1994 "wood furniture quality inspection and quality evaluation;QB/T1951.2-1994 "metal furniture quality inspectionAnd quality evaluation;GB5296.6-2004 "consumer goods instructions part 6: furniture";GB17927-1999 "soft furniture spring soft mattress and sofa of resistance to ignition characteristics of qualification;GB18584-2001 "interior decoration decorates material Wood furniture in the harmful material set limit to ";QB1952.2-2004 "spring soft mattress";QB/T2600-2003 "palm fiber elastic mattress";GB/T3328-1997 main dimensions of the furniture bed kind;QB/T1952.1-2003 "soft furniture sofa";QB/T2280-1996 "swivel chair";QB/T2383-1998 the table and eat chair;QB/T2384-1998 "wooden writing desk";QB/T2530-2001 "wooden ark";QB/T2531-2001 "kitchen furniture";QB/T3644 "lacquer art furniture";QB/T2602 cinema public seating.

furniture general technology standard requirements1, plate wood series (part of the furniture is wood frame)
Surface material: 1.1
As shown in figurePaper requirements.
Base material: 1.2
Environmental protection E1 medium density fiberboard (MDF) (bed frames using E1 real mywood core board), shall not be used among keel overhead, density & ge;0.45 0.88 g/m3, static curvature & ge;23 mpa, internal bond strength & ge;0.65 Mpa, the vertical nail holding power & ge;1100 n, formaldehyde release quantity & le;9 mg / 100 g, accord with environmental standards E1, high density, deformation, board face without obvious defects.
1.3 materials requirements of
(1) timber tree species or productsMan-made board categories, should be consistent and clear in the contract;
(2) cannot use bug eat by moth;
(3) can't use the decayed wood;
(4) cannot use wood with resin capsule;
(5) the product mechanical parts of the wood natural twill degree should not be used by more than 20%;
(6) mechanical parts: she should not exceed 1/3 of the visible material wide width, loose knot diameter shall not be more than 12 mm, after repair processing still affect the structural strength and appearance of the product should not be used (except to decorate her);
(7) to face the faceMaterial should not have cracks, lack of edge;
(8) side surface (including internal crack, lack of edge should be mended;
(9) should not use a through crack in the wood;
(10) solid wood should be solid material, moisture content of 8% 12%.
(11) wood veneer thickness for 0.6 mm above
< img Alt = "" SRC =" http://www.kaiweijiaju.com/uploads/allimg/150526/1-1505261350510 - L.j pg "style =" width: 1011 px;Height: 700 px;
"/ >1.4 paint:
Domestic high-grade environmental protection paint, using environmental protection authentication products, in line with the "GB18581-2001" and "the CNCA - 12 - c - 049-049", "Q/TH4-2001" standard, paint film physical and chemical performance test should comply with the regulations of the GB48931 - GB4893.477 level standard, adhesion performance of the paint film shall meet the GB1720"Primary standard regulation, high solid content, high definition, high fullness, resistance to yellow, feel is good, process using five color three complexion color effect, reach the drawings design requirements.
Coating requirements:
(1) the whole or complete set of product color + should not have clear off color;
(2) the surface of the paint film should not be wrinkled skin, sticky, the paint;
(3) not finishing parts should be kept clean;
(4) the finishing area should not be decolorization;
(5) surface (including the panel) in the face should level off, smooth surface coating;
(6) other parts of the coating surface should be smooth feel,
(7) coating should not have obvious trace processing: Nick, fog light, white edge, bubbling, sagging, shrinkage cavity, brush, accumulated powder, mixed slag and pitting;
(8) coating should not be concave Angle, crack, fall off, scratch and crack.
1.5 furniture veneer and adhesive used for the lining structure:
Domestic high-end brand level of environmental protection, must through the certification of green environmental protection, in line with the GB/T18583, "GB/T2793-1995", "GB/T606-19887","GB/T13354-1992", "HBC18-2003 standard.
1.6 hardware accessories,
Domestic or imported high-grade high-quality hardware accessories, feel comfortable, quiet, no noise, connected, the switch of moving parts flexible, pure metal production, advanced power processing, hinge, loose activities such as a switch more than 20000 times, no damage, all through anti-embroidered, anticorrosive processing, parts without damage.All the furniture stainless steel protection according to the requirements of design drawings.Supporting force, stress is strong, the data fits the GB1730 hardness, the GB1732, impact strength, the GB1720 adhesion, GB1763 standards set by the corrosion resistance and so on,
1.7 furniture color, paint and glue of
Furniture veneer, paint color should cooperate to interior decoration design style.
Paint: using PU, PE, polyester paint, using 5 on the surface of the bottom three paint technology, fully mechanized painting and sanding;Environmental protection glue glue: adopt domestic famous brand;
1.8 glass: toughened glass, no bubble, no wrinkle,Durable and not easily broken.Deviation, appearance quality, size, bending, stress, surface roughness, granularity and shock resistance to meet the national standard GB9963-1999 "tempered glass" regulation.
1.9 the shape and position tolerance of
The whole foot smooth degree for & le;2 mm, mesa of warp degrees & le;3 mm, countertops and exterior panel of flatness & le;0.2 mm.
Sofa, chair series
Surface material: 2.0 domestic high-grade leather, domestic senior high-grade fabrics.
2.0.1 the domestic high-grade leather, tensile strength & ge;10 n/mm, fracture strength & ge;30 / mm, elongation at break & le;4.5 80%, rubbing fastness, color, humidity: 3.5 on the Richter scale, coating adhesion fastness & ge;2.5 N/diluted 10 mm, PH 3.5 to 6.6, poor: 0.7
2.0.2 flame retardant grade special cloth sofa
In America's CA117 furniture (sofa) flame retardant grade standard, latitude and longitude tensile strength to all & ge;Compressive strength by the 300 kg, 16.5 kg to 11.8 kg, weft, resistancePerspiration fastness and washing fastness in acid and alkaline conditions & le;3-4, rubbing fastness, dry & ge;3-4, wet & ge;4, light fastness & ge;4 to 5, the ball & ge;Level 3-5, yarn slip resistance warp & le;3-6 mm, zonal & le;3-6 mm, light experimental sintering, leaving the fire is extinguished.Fabric thickness, thickness of 2.2 mm.
The 2.0.3 lined with high density sponge, flame retardant foam.
Classy article not deformation, surface with surface protection, anti-oxidation density & plusmn;1.5 kg/m3And resilient rate & plusmn;3%, sag hardness & plusmn;20 n, tensile strength & ge;85 kpa, elongation & ge;140 mm, 75% 10% compression set and tear strength & ge;1.7 N/cm, sag performance: sag 25% when the hardness & ge;80, sag 65% when the hardness & ge;130, 65% / 25% sag than & ge;1.7.
2.0.4 soft bread cover requirements:
(1) coated fabric stitching symmetric pattern is complete;The nap of the velvet fabric direction should be the same partCause;Should not have clear off color.
(2) coated fabric should not have scars, color pollution, oil pollution.
(3) soft bread cover surface should be flat, uniform tightness, should not have obvious buckling;A symmetric manufacturability buckling should be symmetrical, distinct.
(4) soft wire should be smooth straight;Rounded corners should be symmetrical;No obvious line, obvious jump needle or exposed threads.
(5) the leakage bubble nails;Arrangement should be neat, basic equal spacing;There should be no bubble nail obvious knock flat or take off the lacquer.
At 2.0.5 box in
Use log forDomestic high-grade room dried lumber moisture content (8% 12%), exposed without knots, decayed, no skin, no bug, no defects such as color, the furniture of real wood paint color shall not deviate from the placement room theme colors.
2.0.6 shape and position tolerance,
The article 6.2.1 shall comply with the ZB/TY81002.1 standard and the provisions of article 6.2.4 sofa overall smooth degree of & le;2 mm, the armrest of warp degrees & le;2 mm, the armrest of flatness & le;0.2 mm.
< img Alt = "" SRC =" http://www.kaiweijiaju.com/uploads/allimg/150526/1-1505261351320-L.jpg "style =" width: 1029 px;Height: 530 px;
"/ >3. The tables and chairs,
3.1 desktop material, multi-layered plywood, 18 mm thickness, soft bag leather, legs with square tube, baosteel steel tube wall thickness & ge;1.5 mm, folding (there are special requirements of the design production as required).< br/ >3.2.1 chair surface material of domestic high-grade wooden desk foot, domestic high-grade fabric soft package, there is a requirement for manual sculpture.
3.2.2 chair material: steel, steel tube wall thickness & ge;1.0 mm, domestic high-grade block fabric soft package, high chair cover coat.
3.3 main dimensions in accordance with the GB / 3326-3326, mechanical properties conform to GB/T10357-6 ~ 7, "GB/T10357-2 ~ 3".
3.4 shape and position tolerance: warp degrees (desktop or turntable) & le;3.00;Flatness,Desktop or turntable) & le;0.20;The perpendicularity of the adjacent side (framework or mesa) & le;3.0;Horizontal deflection (desktop) & le;7 & permil;;Roundness (bend) & le;2.50;Landing stability (desk, chair, stool legs) & le;2.00.
Fixed parts structure requirements: 3.5 use the combined with such as welding, riveting, joggle should not appear loose;Loose screws and other hardware connecting parts can't;Wood glue joint firm, not loose, degumming;Bearing parts, moving parts, there can be no crack, she, worm holes and other defects;Activities should be evenFirm and reliable, and not to emerge, and flexible, easy to use.
4. Woodworking requirements:
(1) made of man-made board parts exposed parts of the face should be sealing side;
(2) the tenon and parts should be combined with should be strong, no broken tenon, no collapse stubble, no crack;
Article (3) bar drawer bearing parts such as the structure should be solid, plate component matching should not loose;
(4) components and accessories should be used for opening and closing flexible;
(5) all kinds of hardware fittings installed should be no loose, no less, no leakage nail (selector apertureExcept), no glue penetration, no wrinkles, no indentation, no crack;
(7) all sorts of wrapping material should be no bubble or degumming;
(8) junction should be no collapse or loose;
(9) in contact with the human body and should not have the blade Angle for storage of parts appearance, appearance of collapse, round, round wire should be uniform;
(10) is not finishing the roughness of the parts, internal fine light should not have plane mark, kerf, appearance of collapse, round, round wire should be uniform;
(11) engraved patterns should be symmetric parts;Distinct;
(12) bump and big dig, bridge, arc edges and should not be missing Angle;
(13) the bottom of the shovel should level off;
(14) each part should not have scar or burrs, etc.;
The line of car (15) wood should be consistent;
(16) the concave and convex steps should be symmetrical;
(17) cutting line should be clear;
Surface (18) processing parts should not collapse stubble, mark, mark.
5. Harmful material set limit to request: formaldehyde release a quantity & le;1.5 mg/L or & le;90 mg/kg;Heavy metals (paint) limited, soluble lead & le;90 mg/kg;Soluble cadmium & le;75 mg/kg;Soluble chromium & le;60 mg/kg;Soluble mercury & le;60 mg/kg.
6. Environmental protection, fire prevention performance requirements: furniture overall performance meet the national environmental protection and fire prevention performance, quality reach grade A standard stipulated by the state.
7.
marks, labels, packing(1) the product name, specifications, materials,
(2) the factory Chinese name, address, the registered trademark of
(3Certificate) and the standard code of
(4) in the process of transportation should be padded lining and packing.
From:
Beijing office furniture companyUnder a
Hotel soft decoration furniture design should notice what item