Software furniture production technology of < span style = "fOnt - size: 14 px;"> metal furniture manufacturing process of metal furniture mainly includes:
Machining technology,
The purpose of, and processing of
Second, the machining process of
Process classification:
Processing object:
Cutting spell & rarr;Hot pressing (cover) & rarr;Cutting & rarr;Cold & rarr;Fine cut & rarr;Sealing side & rarr;Drilling & rarr;Solid wood, stone processing, including sawing, milling, planing, slot cutting, assembly),
Three,Cutting spell
Processing object for wood veneer, including cutting, sewing and spelling a flower,
Purpose: to wood or wood veneer cutting according to the requirement of the design into a certain shape, using sewing machine or hand sewing machine required size and the dimension of a Mosaic pattern of need.
Use equipment: cutting using wood cutting machine, flat-fell seam using pedal sewing machine, spelling a flower to use portable sewing machine.Above all is the use of hot melt type rubber flat-fell seam line;And there's a manual flat-fell seam, using water-based adhesive stickers.
Processing standards: incision after cutting must be smooth, flat, there is no burr, tear, etcThe defect;By wood flat-fell seam should smooth, colour and lustre is consistent, there can be slotted, lap, tearing, burr wait for a phenomenon.
Four, hot pressing (cover)
Processing object for wood veneer, decoration paper, or other cover material (such as PVC, fire prevention board, etc.),
Objective: through glue, heating pressure, decorative cover material and according to certain bond strength of man-made board base adhesive quickly.
Use equipment: four roller coating machine, five layer of hot press,
Standard processing: it is processed materials are not allowed to have bubbles, scratches, indentation, does fold, glue, or itsIt stuff
Five,
Processing object for all kinds of man-made board,
Purpose: for all kinds of man-made board a linear cutting, for conform to the specifications of the panel.
Use: electronic saw, push Taiwan saw, saw, gang saw, etc.
Processing standard: 1, the phenomenon such as incision no collapse edge, black;2, width error & lt;& plusmn;1 mm, diagonal error & lt;& plusmn;L‰, the perpendicularity of the adjacent side & lt;1%, does not allow the appearance of the size of the head.
Six, cold press,
Purpose: the conventional thickness size plate glued into the required thickness or agglutination or aggregate into arc/hollow parts.
The processing object is man-made board and veneers, processing type with thick plate, hollow core slabs, profiled respectively.
With thick plate process: glue & rarr;Group of embryo & rarr;Cold press,
Hollow core slabs process: spell frame & rarr;Glue & rarr;Honeycomb paper prepared & rarr;Glue & rarr;Group of embryo & rarr;Cold press,
Profiled process flowCheng: open aggregate & rarr;Glue & rarr;Group of embryo & rarr;Cold press,
Use equipment: two roller coating machine, cold press machine, honeycomb paper tensile machine
After processing standards: split parts is firm, smooth, no obvious skeleton form does, indentation, and deformation, glue phenomenon.
< img Alt = "" height =" 635 "SRC =" http://www.kaiweijiaju.com/uploads/160715/1-160G5114123115.jpG "width =" 678 "/ >
Seven, fine cut
Processing object for size of wool with thick plate, hollow core slabs, special-shaped pieces, spelling a flower parts, even a widget.
Of all wool size or even open a panel of linear cutting, in order to get the design requirements specifications.
Use equipment: push Taiwan saw, saw
doubleProcessing standard: 1, saw to cut straight, there is no tilt and obvious wavy kerf, no collapse lack of incision, black, etc.;2, part of the difference of the two diagonal length & le;1 mm, the width tolerance & le;0.5 mm;After 3, processing of parts surface must be clean, there is no scratches, indentation, and wood chips, sawdust and other phenomenon.
Eight, sealing side,
Purpose: to use parts exposed edge sealing side material by adhesive glue, to achieve the artistic effect and moistureproof effect.
Use equipment: linear sealing side machine, edge banding machine, curve edge banding machine, overlock machine, etc.
Processing standard: 1, article sealing side edge to be sealed, and flat.Does not allowed to have glue, seal, fold seal leakage and running phenomenon;Of 2,
There is no scratches on the surface of the phenomenon of 3, to keepBoard face clean, sealing side over crumbs and glue don't exist.
Nine, drilling,
Objective: in order to meet the requirements of assembly or convenient connection, joint drill in components and parts, in order to install the accessories and fittings.
Use equipment: six multi-drill, three rows of drilling, single drill, bench drill, drill, etc.
Processing standard: 1, the processing of the surface of the parts without sawdust, indentation, scratches, scratches, and touch the collapse phenomenon;2, coordinate positioning hole size and depth with the requirements of the maximum deviation & le;0.5 mm;3, no collapse of the drilling the hole, black and burr and so on.< br/ >Ten, saw type
Use equipment: push Taiwan saw, band saw, hand saw, saw
lineProcessing standard:
Eleven, milling type
Objective: by choosing a different tool and mould, the workpiece milling out different kinds of external shape, to satisfy the requirement of appearance.
Use the equipment: vertical milling, desktop gong machine, a machine, small gong machine, etc.
Processing standard: 1, the milling shape and size to match the drawings;2, the processing surface must be flat and smooth, smooth lines, natural transition;3, the flat on the surface of the plate, and no collapseDeficiency, collapse edge, no tear or wavy processing traces obviously.
Twelve, sliced and
Purpose: according to the irregular deformation of solid wood materials, by planing to make the corresponding to the flat surface to achieve.
Use the equipment: flat plane, plane, all press,
Processing standards: plane special shaving no collapse, collapse edge missing, torn or wavy machining traces.
13, notching
Objective: by choosing a different tool and mould, work out different shapes of slots to meet the requirements of appearance.
Use equipment: a machine, to openGroove saw, push Taiwan saw, vertical milling, gongs machine, etc.
Processing standard: 1, slot, size to match the drawings;2, the processing surface must be flat and smooth, smooth lines, natural transition;3, flat on the surface of the plate, no collapse, without a tear or obvious wavy machining traces.
14, turning
Objective: processing has a cylinder or cone parts below
Use the equipment: the profile lathe
Processing standard: 1, the processing surface must level off is smooth, smooth lines, natural transition;2, processing cutting mouth no collapse after missing, torn, turning traces.< bR / >15, assembly
Objective: through binding, assembling and preassembly multiple parts assembled into a comply with the design requirements of parts.
Assembly type: binding, assembling, pre-installed, respectively for different types of parts processing.
Use the equipment: pneumatic nail gun, wind, electric drill, hammer, etc.
Processing standards: interface closely, firm, board face is clean, no collapse, indentation, etc.
From: office furniture,
Under a
The advantage of solid wood furniture