1, raw
1) Wood: texture clear, uniform color, moisture content of 8%.
2) Veneer: Texture clear, no rot, insects color and so on.
3) Wood: High import wood, bright color, various kinds of products, complete wood.
4) MDF: are Class A high-fiber, through pest control, corrosion and other chemical treatment, in line with national GB18580-2001 standard and GB / T11718-1999 standards.
5) Paint: Meng Ensuo office furniture using green matte polyester paint, the process can be divided into: open paint (PV) component of polyurethane, sealer (PU) components for the unsaturated resin.

2, the choice of materials
1) choice of materials ways: visually and moisture detection meter.
2) quality requirements: Depending on the product palette of color filter material, no insects, hollow, loose, mildew and cracking phenomenon.
3, is expected to open
quality requirements: vertical section after cutting and the workpiece, does not allow a clear lack of collapse, saw marks.
4, Caulking
quality requirements: The pressing machine pressing time of 3-5 minutes, can not blistering, slotted veneer and so hot after 100-150 degrees Celsius, and the sheet metal is mainly used in the veneer pressure between the gum. Cold press is mainly used for gluing sheets, cold time of 24 hours, the pressure is 4-6T, after the cold without cracking, no glue penetration, blistering inequality.
5, clear edge, edge
quality requirements: Hole no shortage of collapse, drilling cracking phenomenon.
6, drilling
quality requirements: Hole no shortage of collapse, drilling cracking phenomenon.
7, sanding
quality requirements: The surface should be smooth, smooth, can not be tainted sand, thin sand wear phenomenon.
8, assembled
quality requirements: There can not be shaken loose.
9, hand sand
quality inspection requirements: chamfer uniform, smooth, no trace of grit, sand wood no wear phenomenon.
10, background
quality requirements: meet customer requirements palette, clear wood, wood color little difference in the overall post-repair.
11, primer
quality requirements: correct paint mixing ratio, the film no flow of oil, coarse, bubbling delamination phenomena.
12, bottom ash, sand
quality requirements: gray fill color must be consistent with the color of the product, other than ash clean up Buxiu must be clean and after repair, smooth polished to be smooth, smooth, no obvious traces of sand, sand can not wear bottom color, coating and product base to use different equipment and sandpaper.
13, repair color paint
quality requirements: the film flat, smooth, uniform brightness and color palette, can not have the flow of oil, whitening, oil accumulation phenomenon, finished bright colors.
14, the installation package
quality requirements: To lock screw flat, flexible push-pull pumping barrels, metal parts with no more with less leakage with other phenomena, office furniture, internal protection in place, no loose compact package.
15, storage