solid wood furniture process
1, Baipi Polished: 180 # -240 # sand paper mill hand, remove stains, grinding the substrate surface is smooth, to avoid uneven coloring at the bottom coloring phenomenon.
2, spray Background: colorants reference swatches uniform spray dried for 5-10 minutes.
3, closed at the end: with a long-run paint CJ-104 were closed bottom thin spray, spray evenly a & ldquo; ten & rdquo; word, the main purpose is to prevent subsidence and ease of uniformly colored, dry 3-4 hours.
4, sanding: after the first times primer dry, with 320 # -400 # sand paper mill hand, the substrate surface roughness, no sand marks.
5, wipe Grace: with fine cloth or brush applied to the end surface texture of the filling pipe, wipe evenly to make the color consistency after a clean, dry 3-4 hours.
6, spray paint: spray paint Wiserun CJ-107 (PU special clear transparent primer), uniform spray two & ldquo; ten & rdquo; word, dry 4-6 hours here mainly to protect the background colorant increased film thickness and smooth surface material.
7, again spray primer: paint spray again Wiserun CJ-107, a semi-uniform spray & ldquo; ten & rdquo; word, dried for 3-4 hours, mainly to cover the background completely transparent.
8, grinding: with more than 600 # sandpaper Manual sanding to remove surface particles.
9, repair color: reference palette, choose the appropriate paint, spray evenly, dry 3-4 hours.
10, grinding: with more than 600 # sandpaper Manual sanding to remove surface particles, pay attention to clear ground, to prevent the color worn.
11, spray paint: spray once again the long-run paint CJ-107 (PU special clear transparent primer), uniform spray 2 & ldquo; ten & rdquo; word, dry 3-4 hours.
12, grinding: with more than 600 # sandpaper Manual sanding to remove surface particles, the surface roughness, no sand marks.
13, spray PU clear finish: the final step in the present process, the film selection Wiserun paint P2700-3 (PU super scratch-resistant matte clear coat 3 spectrophotometry), evenly spraying 2-3 & ldquo; ten & rdquo; word, dried for 24 hours.
this process characteristics: process is simple, clear colors, strong sense of hierarchy, high transparency, anti-sag, good scratch resistance, suitable for high-end office furniture. Note that the substrate water content, viscosity and spray paint construction environmental factors such as humidity and temperature during construction operations.
13510505995