furniture with style new, colorful, clear wood, and no distortion, no cracking, decay, affordable, and other advantages of a family of new furniture category. Choose the right furniture should pay attention to the following five points:
furniture particleboard, medium density fiberboard and other wood-based panels to the substrate surface, decorated with melamine, PVC, wood and paper veneer wood and other cover veneer, wood grain pattern is clear, natural shape, smooth, has a good visual effect and feel. When they purchase mainly to see whether the plate surface scratches, indentation, bubbling, unglued from the leather and plastic signs and other defects; natural wood grain pattern and smooth, do not have artificial artificial feel; furniture for symmetry, but also pay attention to board surface color, texture consistency and harmonization of people feel like from a symmetrical plate material.
furniture in the production is in the shape of the sheet after cutting saws, decorative edge, parts assembled combination. Quality of its production mainly depends on the quality of cutting saws, edge, surface decorative quality and the quality of plates ports. Production of furniture plate in the Conference saw parts of the plate for flatness, squareness, angle of quality requirements have generally cutting saw plate within 0.01 mm per meter to achieve the required precision sheet metal cutting saw back flat profile for good angle, made after the furniture does not appear inclined plate phenomenon. Conference saw blade will also affect the accuracy of the end face of the sheet, the quality of the end edges, scratches, chipping, saw cutting angle collapse defects also affect the appearance of quality furniture. Edge, surface decoration mainly to see its decorative component coating is uniform, the adhesive is solid, trimming it smooth, spare parts side panels, door panels, drawer fronts and other visible parts of the exit at the other end surfaces whether edge treatment, decorative not touch the traces of adhesive on the sophisticated side of the plate profile. Assembled combination mainly depends on the drilling at the port is fine, neat, connections are firmly installed, the plane face connected with the T-shaped slit there is no gap, there is no hand to promote loosening. Doors, drawers parting whether the gap is too large, the general requirements in 1mm ~ 2mm between the open sliding doors and drawers are flexible and so comfortable.
quality furniture are made of metal and plastic pieces as the fastening connector, so the quality of the metal parts also determine the intrinsic quality of the furniture in the furniture is good or bad. Metal parts required smart, smooth, surface plating is good, you can not have rust, burrs, etc., with higher accuracy requirements. Plastic parts to be handsome in appearance, color, focus on the use of the site to have strength and elastic degrees, not too thin. Open style connector requires rotation flexibility, internal spring-loaded elastic appropriate, so that the furniture in the open will be smooth and easy, no friction sound.
furniture sets currently on the market mainly bedroom furniture and office furniture. There are also multi-functional television cabinets and other electrical products. Its main dimensions of furniture (ie, functional size) are national standard requirements. As the depth of wardrobe hanging wardrobe space provisions shall be not less than 530mm, length hanging clothes hanging clothes stick to the surface along the spacing should be more than equal to the base plate 1400mm, desk furniture specified height of 680mm-760mm, wherein the middle drawer desk along the ground to the height of the intermediate high clearance should be greater than or equal 580mm, between bookcases layer should be not less than 520mm high clearance and so on. Above the main dimensions, the time of purchase to pay attention, because furniture if less than the specified size, the use will bring a lot of inconvenience, affect the use of furniture. Such as the depth of wardrobe space for hanging clothes too small will affect the resulting door is not closed upper phenomenon.
furniture generally particleboard and medium density fiberboard. Its plate formaldehyde emission standards are national regulations. Wherein the predetermined Particleboard formaldehyde emission is less than or equal to 50 mg per hundred grams, medium density fiberboard Hectogram formaldehyde emission less than or equal to 40 mm. Formaldehyde, also known as formalin, there is a certain impact on human health of hazardous and toxic substances. If consumers in the purchase, to open doors and drawers, can stimulate the sense of smell to have an odor, causing watery eyes or cause coughing condition, then the furniture formaldehyde emission exceeds the standard requirements, you should not buy this kind of furniture. Otherwise, once employed, especially in the case of the use of air conditioning, indoor air environment will contain formaldehyde, affecting the health and occurrence of certain diseases.
& nbsp;
13510505995