Installation acceptance is the Office furniture, Purchase at the end of the procedure and process.The following on furniture installation and acceptance of purchasing furniture company two directions for office furniture installation acceptance needs to pay attention to details.
So, first as an office furniture manufacturing and installation company, in the market environment in the dominant position.Must be establishedIs the best service attitude to people, and ensure the quality of the product.Before installing the facing involves the transport of furniture, in the middle of the transport handling, display, resettlement is the need to be very careful.One of the most important problem is the installation and timely delivery.Meg furniture found, if not timely installed, customer satisfaction will be serious.At the same time, office furniture company personnel also should pay attention to prevent the customer to install itself.Such as random change of office furniture, etc.
at the time of acceptance of office furniture, as a consumer, first is to ensure the quality of the product shipped is no problem, that we need to know some knowledge about the quality of the furniture.Office furniture wall has the seam!File cabinet high and low & hellip;& hellip;These are the furniture after installation problems that may occur.Meg furniture also found have something for furniture installation is very disturbing.So, furniture installation specification exactly?How much the crack of the door is reasonable?How to avoid problems?Please see Meg furniture professional installation teacher's advice.
forIn office furniture to decorate, measurement and design CAD drawing, it is quite necessary and very important.Measure directly led to the subsequent engineering is unable to continue.If you don't CAD design, can be directly please Meg office furniture to the company's designers Benna design.
1. The door has a seam between: according to "wood furniture general technical conditions" (GB - T3324-2008), within the standard & other;Shape and position deviation & throughout;Express in the box: &otherAll the seam (not design requirements) ≦ 2 mm & throughout;.If the gap is too big or between door plank crack on the small, probably due to uneven ground, after using infrared level testing at this time, can use professional gasket will be the appropriate adjustment of office furniture.
2. The cabinet put oneself in another's position on the back or forward: generally speaking, the finished product tank are right angles, it is also caused by uneven ground, according to the degree of tilt appropriate add gasket to adjust.
3. A significant gap between furniture and walls, and aperture size: this is due to the factMetope is not straight, if it is a custom furniture, manufacturers usually live with wood cabinet put oneself in another's position gap between wall and seal, and according to the color of furniture to choose corresponding glass glue, so that more beautiful.But if it is finished product of office furniture, also can only be put it slightly leaning to the wall.
4. Poor damping push-pull drawer: mostly belong to the ground uneven or improper debugging workers, can according to the experience for debugging.There may be a slide back the plastic clip have burr lead to push and pull, in this case, use after a period of time can solve the problem.
5. The sliding door to slide: if it isJust installed appear this kind of circumstance, mostly caused by the uneven ground, increase the gasket;If use after a period of time this happens, most likely, when using the uneven weight is put in the cabinet put oneself in another's position, at this time for workers to adjust.
To be sure, some manufacturer before installation will be carried out on the ground, metope flatness and verticality of the inspection, and according to the test results in the proper adjustment when installation, the customer can know the problem the first time.
Here to teachYou determine whether the installation of a few action reasonable way: the first is the furniture surface to horizontal, vertical surface vertically.Plate of less than 2 mm gap to office furniture, solid wood furniture aperture is not greater than 4 mm.Drawer, sliding door to smoothly.
Such as office filing cabinet to counter such furniture, if put on a lot of weight, time is long will be out of shape, so the reasonable use of office furniture and love is a must.< span style = "background image: initial;Background - attachment: initial;Background - origin: initial;Background - clip: initial;Background - color: white.Background - position: initial initial;Background - repeat: initial initial;"/ >
13510505995