Removal of office furniture smell, odor removal office furniture needs reasonable methods and experience!

Call the hotline to solve the problem of Huayu office furniture: 13681596554

Buy the new office furniture smell how do? With the improvement of living standards, people on environmental protection and health of growing concern, as a novel style, beautiful appearance, new conference table furniture, opened a ineffable pungent odor blow on the face and, that will is a what kind of situation? According to the relevant data statistics, furniture odor complaints have accounted for more than 50% of the total number of furniture complaints, it is obvious that the problem is serious, and the impact of the extensive! "Green furniture table dining chair furniture smell" has become increasingly concerned "".

Furniture solid wood conference table odor sources
To solve the problem of furniture smell, it is necessary to understand the origin of furniture smell; a desk furniture manufacturing need sheet, adhesive, coating, then the smell of furniture also and the three aspects have close relationship.
Currently on the market for manufacturing the conference table furniture plate ten to have solid wood and wood-based panel, wood-based panel including towel density fiberboard, particleboard, plywood and other wood belongs to natural growth of timber, its itself is non-toxic harmless, environmental protection, and wood-based panel will contain formaldehyde. Formaldehyde is a colorless, has the stimulation and soluble in water to the gas, it has protein coagulation, the harm to the human body greatly, so the state for the formaldehyde content of these plates do strict rules, such as medium density fiberboard formaldehyde content must comply with the requirements of GB \/ T11718-1999, A-class formaldehyde content is less than or equal to 9.0mg \/ 100g, the formaldehyde content of B between the 9.0~40mg \/ 100g; therefore, the smell of furniture first to solve problem of plate formaldehyde content.
Secondly, in the manufacturing process of furniture, will be used to adhesive. Adhesive is mainly synthesized by chemical raw materials, and some of the adhesive will contain free formaldehyde, such as a urea formaldehyde glue, the largest amount used in wood-based panel, it is inevitable that sheet containing formaldehyde, and part of the adhesive will use organic solvent, the unseen will bring the pungent smell of furniture, so the state for adhesive also corresponding national standards, in GBl8583 - 2001 provisions of free formaldehyde content is less than or equal to 0.5 g \/ kg, twelve toluene toluene content is less than or equal to 200 g \/ kg, so the smell and the damage of the adhesive can not be ignored.
Furniture surface coating will be used to paint, through the different performance, different coating effects of variety, giving the furniture a good role in the decoration and protection. For furniture painting paint solvent based coatings and waterborne coatings, organic solvent which contains a certain amount of different kinds of solvent based coatings, these organic solvents function is mainly to make the solvent coating convenient packaging, storage and use of furniture, so in the process of painting can not avoid the furniture with residual odor of organic solvent, but not completely dry solvent coating after the organic solvent residual odor; harmful substances and solvent based coatings used for national furniture painting in, made clear in GBl8581-2001, the provisions of the limits of volatile organic compounds, so choose a suitable solvent based paint will paint manufacturers national standards reduce the smell of furniture; water-based paint coating as the future has become a trend, its environmental protection, low odor has been all over the world. Widespread recognition, countries for solvent based coating has limit vigorously promote water paint, China from 2005 onwards will no longer approve new solvent based paint manufacturing enterprises, some well-known furniture factory has successfully the water-based paint applied to the furniture, the furniture of environmental protection worthy of the name!
Furniture is currently the most in the use of solvent based coatings for surface coating, in the furniture coating when organic solvent smell will penetrate into furniture plate back, and plates, adhesives, chemical combination, resulting in furniture smell, then to solve the smell of furniture residue to make furniture plate on the back of the painting.
Furniture odor solution
Solve scheme: log wind Pu suits paint (see table) product characteristics: log wind PU paint set is Huarun Paints pioneered a a PU paint, has the following characteristics: \ \ logs texture: penetration strong, film feel smooth and exquisite, natural simplicity, return to innocence; \ \ quick drying,: Construction at 25 DEG C under normal temperature, film 10 minutes to dry, 1 hour can be polished, 4-6 hours after coating finish can packaging and shipment, effectively ensure the film low odor, low residue, can be packaged goods, effectively ensure the film with low smell and low residue.
\ \ environmental protection: This product was detected by EN71Part3-1994 European standard, basic not containing heavy metals, benzene content & lt; 0.001%, the content of toluene & lt; 0.001% and xylene content & lt; 0.0066%, greatly reduce the content of harmful substances;
Construction method: the wood wind PU set paint to mix to the proportion of the construction viscosity, fully stirring evenly, and then spray construction.
Note: must stir the paint before the ratio must be carried out in accordance with the provisions of the proportion;
In order to achieve the best effect of the coating on, please use the matching curing agent;
The construction is not suitable for 5 DEG C, so as to avoid disadvantages and slow dry white;
The log wind PU transparent primer only with the log wind PU Matt topcoat use collocation!
Packaging and storage: in a cool, dry and ventilated place for storage, to avoid the sun and rain and high temperature; storage at the above conditions, since the date of production from shelf life of one year.
Process is recommended: base material: solid wood, veneer construction condition: temperature of 25 DEG C 75% humidity \ \ substrate water content rate of dry to local wood equilibrium rate of water; \ \ paint to form a complete set, according to the weight proportion, stirring uniform static 15 to 20 minutes, and then use; \ \ under the conditions of temperature is less than or equal to 5 DEG C or humidity higher than or equal to 85 percent, not suitable for construction, so as not to cause white, slow drying, and other ills.
Solution two: water-based paint (see table two) the characteristics of the product: water-based paint is a new type of environmentally friendly coatings, the use of water for dilution dilution, have the following characteristics: the strong environmental protection: in the "technical requirements for environmental labeling products water-based paint" (HJ \/ T201 - 2005) can be specified in the content of volatile organic compounds VOC (250G \/ L, toluene, benzene, toluene, ethylbenzene and total content of ~500mg \/ L (equivalent to less than 0.5%), significantly lower than the limit in solvent based coatings; the good permeability, low odor, color, water \ \ colored fine bright color, strong coloring without disposable bottom the pale bottom paint transparency, good hardness, smooth feel, strong weatherability; construction method: water stain prepared by the water to the water bottom color colored fine base material T80231, the general color concentration is less than 6, sprayed directly on the substrate, up to To the bottom of the ideal color effect; \ \ water bottom paint directly using water according to the proportion, mixing, standing for ten minutes after spraying; note: the solid content of water-based paint, thin film, is not recommended for deep wooden eyes closed coating, film hardness, water resistance, alcohol resistance is poor; water stain dry color difference of the larger, spraying primer after they show their true colors, the color should be finished plate as the standard; each time the coating amount of water paint can not exceed the 80g \/ m2, otherwise it will slow dry film problem: each time the water \ \ paint to be fully dry after coating, otherwise may cause swelling, bite bottom problems such as the low temperature and high humidity, rainy weather, should stop construction, otherwise it may produce a film, not dry, slow flow, poor adhesion of paint film Ills; \ \ avoid water paint can and other organic solvents or oily diluent, so as not to cause unnecessary losses; packaging and storage: white glue can be packaged in 5 to 35 DEG C under the condition of storage for 6 months, avoid direct sunlight, pay attention to antifreeze.
Process is recommended: base material: solid wood, veneer construction condition: temperature of 25 DEG C humidity: 75% \ \ substrate moisture content rate of dry to local wood equilibrium rate of water; \ \ add water, stirring evenly standing for 10 minutes before use; \ \ under the conditions of temperature is less than or equal to 8 DEG C or humidity greater than or equal to 80%, not into the construction so as not to cause white, not dry and other ills.