identification plate office furniture merits
plate office furniture in the form of a rich, making simple mass production, sales volume, and therefore there is a lot the production of furniture manufacturers, how do we determine the time of purchase of furniture his cons?
first relatively easy from the production process. For example a combination of parts, hardware fittings should be of high quality, its own furniture and adhesion and adhesion to be very satisfactory. The overall structure of furniture, each connection point including the connection point level must be between the vertical adhesion, can not have a gap, not loose.
Second, look at the surface treatment, where the open-finish treatment, wood, wood brown eyes must be rendered, three-dimensional sense. Where a sealed paint surface treatment, surface feel most like piano finish in general, regardless of edible vegetable oil, contaminated, matte, high-gloss or plain glass, paint cleanliness, smoothness and hardness must be high. If the wood veneer surface, must be done veneer surface should be smooth, not sparkling; there can be no complementary color marks on the veneer; the lines veneer dense, splice without any gap, pattern To obtain accurate. Can have these three conditions, the production process from the point of view, is a good veneer furniture.
we can judge from veneer: Use thin wood treated surface, gives the same look and feel as solid wood furniture, natural color and tender, texture clear, long life, artificial substrates no distortion, no cracking, low cost . The current standard veneer veneer is 0.6mm.
wood paper veneer: through modern laser typesetting technology, made of imitation wood grain, simple process, high temperature, easy to wear, even lower than the cost of wood veneer. Film: veneer furniture generally use polyester paint, varnish, matt paint, resin paint. Furniture surface coating can protect the substrate, while beautifying surface decoration. Therefore protect the furniture surface wax coating paint, in fact, both to protect the surface of furniture, decorative beauty, but also to protect the inherent quality of the furniture. Extended service life. Meanwhile, we also pay attention to furniture is usually made of metal hardware, installation and removal are very convenient, high-precision machining can dismantle the installation, so the purchase should pay special attention to the quality of furniture hardware. The disadvantage is that some manufacturers of furniture and other materials to produce particleboard, veneer and all-inclusive and no words on, easy to release formaldehyde.
13510505995