Firewood class office furniture production process
selection: US FORMICA (FORMICA) High Pressure Decorative Laminate (0.8mm thick), durable sun does not fade; substrate medium density fiberboard, particle board; Edge uses quality PVC edge banding.
production flow chart:
quality requirements:
veneer smooth, does not allow foaming pit; after forming part of a consistent pattern surface, smooth side of nature; doors, drawers and other parts can be opened and closed to open flexible smooth, no abnormal noise and block; Edge firmly straight, no nicks, burrs, natural and smooth; snug fitting lid mounted parting less than 1.50mm, Built-in parting less than 1.40mm.
high-grade large classes, conference table, bookcases series
selection:
Thailand teak, walnut, beech and other high-grade imported veneer.
Thai pomelo, walnut, beech wood edge.
internal high-density fiberboard substrate.
Taiwan-funded "great treasure" brand matte polyester paint spraying.
Taiwan "locomotive" brand three rails, Italy "elephant" brand locks, and other imported high-quality hardware.
processing methods:
wood dried to a moisture content of less than 9% or less.
will be all kinds of wood products made from sections of the substrate, namely Baipi professional words.
Baipi will be noisy and with light oil seal disabilities that (SEALER) were sealing to prevent moisture exchange with the outside world inside the timber.
spray sealing primer, sanding after drying.
in constant temperature and humidity, dust and highly professional paint spray paint room
quality basic requirements:
mesa formation, no paint particles, bubbles, slag point, uniform color (except natural wood texture ).
timber interfaces close fight.
uniform lines, corner natural transition. After
product with metal connector splicing, the overall look close, the gap small and uniform and so on.
whole product texture, wood color, Edge, paint basically consistent, natural transition.
13510505995