From understandingOffice furnitureStructure departureOffice furniturematters needing attention   Office furniture, we are not unfamiliar, a lot of people buy furniture is to look at the brand, look at the appearance, listen to people say, smart will also look at the production of materials and workmanship. However, it is not enough to determine the quality of furniture products, excellent quality and no light is not enough, and the value of the furniture is very important to determine the value of “ furniture structure ” there are a lot of people do not pay attention to. Today Shenzhen office furniture is small make up for this to have the friend who needs to sweep literacy.   Office furniture usually has the following structure:   A, support structure Sit, bedding can bear static load, but also bear the dynamic load and impact load, therefore, should meet the requirements of strength. Generally speaking, the software office furniture has the support structure as the support, the support structure has the traditional wood structure, the steel structure, the plastic molding frame and the steel and wood combination structure. But there is no support for the whole software office furniture. Wooden support for the traditional structure, belonging to the general frame structure, adopts a tenon and mortise joint, screw joint, round nail joint and connecting fastener, etc., force components, shall be selected hard wood, material with excellent elasticity and no worms eyes, festival and defects, defective timber should be arranged in small stress area. Because of the soft material coating, in addition to the arm and foot exposed parts, other parts of the processing accuracy is not high. General use of steel structure welding or screw joint, but also the use of bending forming. The plastic bracket structure, because the plastic characteristics can be injection molding, calendering, and forming a software structure. B, software architecture   1, thin soft structure This structure is also called semi software structure, such as the use of rattan, rope, cloth, leather, plastics textile, taut and artificial leather made of materials, such as products, parts with thin layer of sponge. Some of these semi soft materials are directly woven on the box, and some of them are hung on the frame, and some of them are woven separately in the wooden frame.   2, thick type software structure Thick soft structure can be divided into two forms, one is the traditional structure of spring, spring for the use of the soft material, then in spring coated palm fiber, cotton, foam, sponge and other and finally again coated decorative cloth (as shown in figure 4-45a). Spring has spring, spring, spring bow (snake). The other is the modern sofa structure, also called the cushion structure. The whole structure can be divided into two parts, a part is by a bracket masked (or bandage) at the end of fetal; another part is a soft cushion, made of foam or foam rubber and fabric.   3, inflatable office furniture Inflatable office furniture has a unique structural form, the main component is composed of a variety of airbags, and to its surface to bear weight. The air bag is made of rubber cloth or plastic film. Its main feature is that it can be self inflating composed of a variety of office furniture, carry or store convenient, but single body height to maintain its stability limit. Chinese furniture