acceptance of office furniture tips
office furniture for the non-standard products, but with our lives, directly affects the quality of work and the health of office workers, so the acceptance of office furniture purchaser becomes the main points of interest. Therefore, the author from the reality of work operations, introduce some simple furniture and acceptance methods to help identify quickly and accurately identify the procurement units purchased furniture quality standard meets procurement requirements, whether technical standards.
First, check whether the material qualified. Various office furniture, surface materials are different. Such as tables, chairs, cabinet legs, asked to use hardwood, relatively strong, can load, and the internal use of materials is available in other materials; found wood insect eyes, out of foam, indicating incomplete drying. Checking the surface, but also open the doors, drawer door to see there is no decay in the material inside, you can use a fingernail pinch a pinch, pinch into a description of it decayed within the material. After opening the door with his nose to smell if Chongbi, glare, tears, described glue formaldehyde content is too high, harmful to humans.
second is to check whether the formation of the base. This is put on the ground flashed at a glance, and some furniture on only three legs landing. Take a look at the desktop is straight, not bow back or fallen waist. Desktop raised, the glass will be placed on spin; Desktop recessed, put a pressure on the broken glass. Note Check doors, drawers parting can not be too big, to pay attention to the cross-level firm straight, Siemens can not sag. Office furniture factory
Third, check the structure is solid. Small pieces of office furniture, such as chairs, stools, racks and other goods can be delivered after a tow on the concrete floor and gently fell Yishuai, the sound crisp, indicating good quality; If the sound made dumb, chop miles Bala of noise, indicating mortise combination is not tight, the structure is not strong. Write Word table, the table can shake hands shake and see steady instability. Sofa can sit down, if a move to sit creak shilly to ring a shake Akira, is the nail alive, will not take long.
Fourth, check whether the tight patchwork veneer. Whether paste wood veneer, PVC or paste pre-paint paper, should pay attention to whether the leather was smooth paste, without drum bag, blister, patchwork lax phenomenon. Check to see directed at the light, red light does not see it. Ash wood veneer furniture easier to damage, generally only two years. On the wood veneer, the plane side of the veneer peeling than good. Recognition of both methods is to look at patterns of wood, wood veneer chipping straight and dense texture, peeling the veneer patterns and the sparse song. Particleboard veneer furniture, some of the places to be Edge, Edge board will not absorb moisture, swell and damage. General veneer furniture corner place easy to tilt, you can hand acceptance buckle at the corners, if a button on it, indicating a problem with plastic.
Fifth, check whether the flat edging. Edge uneven, wet material described within a few days Edge will fall. Edge also is rounded, not straight edge at right angles. Strips of wood edge seal damp or crack easily. Office furniture plywood package insert, including at the bar with nails, pay attention to whether the formation of nail holes, nail holes Department are consistent with other colors at. Usually nail holes are sealed with putty, putty to pay attention to whether the bulge, such as drum up will not do, and slowly putty will fall out from the inside.
Sixth, check the paint section is smooth. Paint part
office furniture should be smooth, not saliva flow, do not wrinkle, pimple-free. Corner section not straight edge at right angles, at a straight edge easily collapse slag, Diaoqi. Office furniture Siemens which should also be a coat of paint, paint vain board easy to bend, not beautiful. At the same time, it depends on whether it is reasonable to install accessories. For example, check the door lock switch Ling ineffective; cabinet should be installed three concealed hinges, some only installed two will not do; the three screws, and some cut corners, only one screw.
13510505995